![]() Prolific uses ser2pl.sys where as FTDI has its own. I also have used FTDI devices, and also Prolific Technology device, they both dont have these issues. I then have to remove the device again and then reconnect the device after which it creates a valid com port. It makes a COM port and works fine, but if I remove the device without closing the COM Port and then reconnect the device, the device manager shows the device to be connected and the com port number along with it but that com port is no more accessible using a terminal software. HKR,EnumPropPages32,"MsPorts.dll,SerialPortPropPageProvider"ĪddService = usbser,0x00000002,UsbSer_Service %SNMPMOD% = UsbSer_Install, USB\%SNMPMODID% inf file made by Zadig with a few modifications in vendor name ĭeviceGUID = " Then I used Zadig to generate a USB CDC driver for the hardware. I have designed an embedded system using PIC18F67J94 and have used a random VID and PID. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
August 2023
Categories |